Can You Put Training Wheels on a Bike With Gears?

You just got a new bike and want to start riding as soon as possible. However, you are having trouble balancing on the seat of your brand-new bicycle. Concerned about falling over and hurting yourself or another person, you have decided it is time for training wheels. But can you put training wheels on a bike with gears?

Adding training wheels to a bike with gears is difficult because the tires are typically much wider and have many more spokes than traditional bikes.

In this article, you will learn everything there is to know about putting Training Wheels on A Bike with Gears, including how you can do it, and which ones are the best training wheels.

Can You Put Training Wheels on a Bike With Gears?

Yes, you can put training wheels on a bike with gears. You can attach training wheels to a geared bike to help you learn how to ride. You can attach training wheels to a geared bike by following these steps:

  1. Attach the brackets that come with the training wheels to the rear axle of the bike.
  2. Place the training wheels on the brackets.
  3. Adjust the tension on the springs so that the training wheels are level with the ground.
  4. Test ride the bike to make sure that the training wheels are properly attached and adjusted.

How to Put Training Wheels on Bike with Gears?

Here is how to put training wheels on a bike with gears.

Step 1: Setting the Wheels up

The first step is to set the training wheels up on the bike. You will need to attach the wheels to the shoulder bolts. The bolts should be pointing downwards and inwards. You will also need to make sure that the washers are in place.

Once the bolts and washers are in place, you will need to hand-tighten the bolts. You should not use any tools to tighten the bolts.

You will need to receive numerous accessories that you will need to join to the shoulder bolt. These include a plastic sleeve, a locknut, and a cotter pin.

The cotter pin will go through the hole in the bolt and then through the sleeve. The locknut will go on the other side of the sleeve. You should hand-tighten these as well.

You should do it sequentially starting from step 1 all over again. This time, you will need to use a wrench to tighten the bolts.

The wrench should be a size that fits the bolt. You should tighten the bolts until they are snug. Be careful not to overtighten the bolts.

Step 2: Position the Axles

In order to position the training wheels correctly, you will need to trace the washer and axle washer along with the rear tire axle.

This will help you determine where to place the training wheels so they are in line with the bike frame. Most 16″ bikes come with training wheels that can be removed.

Step 3:Make Sure That the Training Wheels are Functional

To put training wheels on a bike with gears, you first need to place the bracket brace onto the bike’s axle. The bracket brace is what will hold the training wheels in place.

You then need to spin the axle washer in the opposite direction to make sure that the axle is loosely attached. This will ensure that the training wheels can move up and down as needed.

Step 4: Reposition the Brackets

In order to properly put training wheels on a bike with gears, you must first adjust the height of the bracket. Once the bracket is the correct height, you must then reposition the brackets.

This will ensure that the bike is standing straight and that the unit offers you the desired results. If you find that you need more height, you can purchase upgrade brackets. Additionally, pedals with straps are available for purchase to help you pedal more easily.

Step 5: Tighten the Nuts & Screws

Now that you have the training wheels in the position you want them, it’s time to tighten the nuts and screws. This will help to keep the training wheels in place while your child is riding.

You want to make sure that the training wheels are tight enough so that they don’t move around, but not too tight that they can’t be adjusted if needed.

Once you have tightened the nuts and screws, have your child get on the bike and see how they do. If they are still having difficulty, you may need to lower the training wheels to give them more support.

On the other hand, if they are rocking and rolling, you can continue to raise the training wheels over time to teach them to ride without them.

Step 6: Test it Out

Now that you’ve made all the necessary adjustments, it’s time to test it out! Take the bike for a spin around the block, or better yet, have your child ride it while you walk alongside them.

This will give you a chance to see how they’re doing and make any further adjustments if needed.

Over time, as your child gets more comfortable and confident on their bike, you can slowly start raising the seat until they’re at the proper height. And, before you know it, they’ll be riding without training wheels in no time!

What Are the Best Training Wheels for a Bike with Gears?

Most training wheels are not compatible with a bike that has gears. The weight of the training wheel can cause the chain to come off of the gears.

Special training wheels that attach to the frame of the bike are needed if a bike with gears is needed. Heavy-duty training wheels are the best option for a bike with gears.

When it comes to training wheels for a bike with gears, Moshay bicycle training wheels are the best. You can find more information on the company’s website. One of the best in the market, these training wheels have an attractive look and make learning how to ride a geared bike much easier.

Should You Put Training Wheels on Bikes With Gears?

You can put training wheels on a bike with gears, but you should not. The reason is that training wheels are designed for bikes without gears. When you put training wheels on a bike with gears, it can throw off the bike’s balance and make it harder to ride.

Additionally, the training wheels can get caught in the gears, which can cause damage to the bike and make it more difficult to ride.

If you have a bike with gears and you want to put training wheels on it, you should take the bike to a professional to have them installed correctly.

Can you put stabilisers on a geared bike?

Yes, you can put stabilisers on a geared bike. The stabilisers come as a pair and can be installed on both sides of the bicycle. They are easy to adjust or remove without tools.

How do you ride a bike with gears for beginners?

There are different types of training wheels for different types of bikes. You should put training wheels on bikes with gears if you want to teach children how to ride a bike.

We do not recommend putting training wheels on bikes with gears because it is not wise to teach children how to ride a bike before they master the art of balancing without training wheels.


In conclusion, yes, you can put training wheels on a bike with gears. It is important to learn how to pedal and enable the children to get a feeling of riding a bike on their own. Previous training wheels are necessary for kids at an early age to learn the eventual skill of pedaling.

Anna Stones